PVC ESD – Antistatic Polyvinyl chloride
PVC (polyvinyl chloride) is classified as belonging to the group of amorphous thermoplastics. Generally, PVC-u, i.e. rigid PVC is used in the production of plastic pipes and profiles as well as plastic sheets. PVC convinces through its high resistance to most acids, plus alcohol, gasoline, lubricants and grease. ESD PVC has a low flammability rate through a relatively high proportion of chlorine. ESD PVC comply with the international UL 94 V-0 fire protection classification. ESD PVC plates are especially suited for thermal processing (forming and bending). Available in a Hard Coat version, resistant against organic solvents, such as acetone.
| Material type: Clear transparent | PVC | |||
| Test Method | Unit | |||
| Electrical | ||||
| Surface Resistivity | ASTM D-257 | DIN 53482 | Ω | 10⁶-10⁷ |
| Electrostatic discharge | MIL B-81705B | sec. | less than 0,1 | |
| Dielectric constant | ASTM D-150 | DIN 53483 | ⁻ | 3 |
| Physical | ||||
| Specific Gravity | ASTM D-792 | DIN 53479 | ⁻ | 1,40 |
| Water absorption | ASTM D-570 | DIN 53495 | % | 0,03 |
| Pencil hardness | JIS K 5400 | ⁻ | 2H | |
| Coating Layer Bond Strenght | JIS D 0202 | ⁻ | 100/100 | |
| Optical | ||||
| Transmittance | ASTM D-1003 | % | 75 | |
| Haze | ASTM D-1003 | % | 5 | |
| Refractive | ASTM D-542 | ⁻ | 1,53 | |
| Distinctness of image | JIS K 7105 | % | 85 | |
| Mechanical | ||||
| Tensile strenght | ASTM D-638 | DIN 53455 | N/mm2 | 63,7 |
| Tensile elongation, break | ASTM D-638 | DIN 53455 | % | 40-70 |
| Flexural strenght, yield | ASTM D-790 | DIN 53452 | N/mm2 | 98,1 |
| Modulus of elasticity | ASTM D-638 | DIN 53487 | N/mm2 | 2800 |
| Flexural modulus | ASTM D-790 | N/mm2 | 3400 | |
| Compressive strenght | ASTM D-695 | N/mm2 | 83,4 | |
| Impact strenght | JIS K 7110 | kJ/m2 | 2,9 | |
| Notched IZOD impact strenght | ASTM D-256 | J/m2 | 29,5 | |
| Thermal | ||||
| Deflection temperature | ASTM D-648 | ⁰C | 60-65 | |
| Linear expansion coefficient | ASTM D-696 | I/⁰C | 6-8×10-5 | |
| Thermal conductivity | ASTM C-177 | W/mK | 0,16 | |
| Specific Heat | ASTM C-177 | kJ/kgK | 0,84-1,26 | |
| Heat shrinkage | JIS K 6745 | % | -2,0 | |
| Flammability | UL-94 | ⁻ | V-0 | |
| self-extinguishing | ||||
Please contact us for further information